Jenn-Air Wine Cooler CO Error: Cooling System Fault
What Does Jenn-Air Wine Cooler Error Code CO Mean? The CO error code on Jenn-Air wine coolers indicates the cooling system is not functioning properly. The compressor or thermoelectric cooling module is failing to lower the cabinet temperature to the set point. Common Causes Low refrigerant charge: A small leak in the sealed refrigerant system […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Maybe. Wine will not be damaged immediately but prolonged high temperatures accelerate aging and can spoil wine. Move valuable bottles to a cool location.
Can I reset the code?
Yes. A power cycle may restart the compressor if it tripped on thermal overload. If cooling does not resume within an hour, professional service is needed.
When to stop immediately?
Stop if you notice: Cabinet temperature exceeds 70°F, Compressor makes clicking but never starts.
Symptoms You May Notice
Wine stored above desired temperature
The display shows the actual temperature climbing above your set point — wines are not being kept at safe storage temperature.
Compressor does not run or runs constantly
Either the compressor never turns on, or it runs nonstop without cooling the cabinet effectively.
Possible Causes
Low refrigerant charge
A small leak in the sealed refrigerant system has reduced the cooling capacity over time.
Requires ProfessionalFailed compressor or cooling module
The compressor motor has failed or the thermoelectric module has degraded.
Requires ProfessionalSafe Checks You Can Do
-
1
Verify the environment
Ensure the wine cooler is not in direct sunlight or next to a heat source. Check that the ambient room temperature is within the unit's operating range (50-95°F for most models).
Wine coolers work harder in hot rooms — installing in a garage may exceed the design limits.
-
2
Check airflow around the unit
Ensure there is adequate clearance around the wine cooler for heat dissipation — at least 2 inches on sides and 4 inches at the back.
Built-in models vent through the front kick plate — ensure it is not blocked.
When to Call a Professional
Contact a qualified technician if:
- Compressor does not start with direct power
- Refrigerant lines are not cold during operation
- Start relay or overload device has failed
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Wine Cooler Repair Service Schedule Appointment