Jenn-Air Cooktop PF Error: Power Failure
What Does Jenn-Air Cooktop Error Code PF Mean? The PF code on a Jenn-Air cooktop is a power failure notification. It appears after the cooktop loses and regains electrical power, alerting you to check that all cooking zones are safely turned off. What to Do Press any button to clear the PF display. Before resuming […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. PF is informational only. The cooktop is safe to use once the alert is dismissed.
Can I reset the code?
Yes. Press any button to dismiss PF. The cooktop resumes normal operation.
When to stop immediately?
Stop if you notice: PF appears without a known outage, Cooktop does not function after dismissing PF.
Symptoms You May Notice
Display flashes PF after power returns
The cooktop shows PF blinking on the display after electricity is restored.
All zones are off after power returns
Any cooking zones that were active before the outage are now off.
Clock or timer has reset
Timer settings have cleared and need to be set again.
Possible Causes
Power outage
The home experienced a power outage from the utility or weather event.
DIY PossibleTripped breaker
The circuit breaker supplying the cooktop has tripped.
DIY PossibleSafe Checks You Can Do
-
1
Dismiss the PF alert
Press any button or turn a zone knob to clear the PF display.
Verify all zone controls are in the off position before clearing.
-
2
Check for unattended cooking
If cooking was in progress during the outage, check food for safety and the cooktop surface for spills.
Spills on a hot induction or electric surface can carbonize and become difficult to clean.
When to Call a Professional
Contact a qualified technician if:
- Breaker trips when cooktop is used at high power
- Power cord shows damage
- Repeated PF codes without utility outages
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Cooktop Repair Service Schedule Appointment