Jenn-Air Range F1-E1 Error: Safety Relay Stuck
What Does Jenn-Air Range Error Code F1-E1 Mean? Error code F1-E1 on a Jenn-Air range indicates that the safety relay on the electronic oven control board is stuck closed. This is a critical safety fault — the oven heating element may continue to receive power even when the oven is turned off. Why This Is […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
No. A stuck safety relay can cause the oven to overheat uncontrollably. Disconnect power and do not use the range until repaired.
Can I reset the code?
No. Resetting will not fix a welded relay. The control board requires replacement.
When to stop immediately?
Stop if you notice: Oven heats when it should be off, Any smell of burning or overheating.
Symptoms You May Notice
Oven stays hot after turning off
The oven cavity remains at cooking temperature even after cancelling the cycle.
Kitchen feels unusually warm
Excessive heat radiates from the range when it should not be operating.
Beeping alarm with no cooking active
The range sounds a continuous alarm tone while idle.
Possible Causes
Welded relay contacts
The relay contacts have fused together due to electrical arcing, keeping the heating circuit permanently closed.
Requires ProfessionalFailed control board
The electronic oven control board is sending incorrect signals to the relay.
Requires ProfessionalSafe Checks You Can Do
-
1
Disconnect power immediately
Turn off the circuit breaker for the range right away. Do not use the range.
A stuck relay is a fire hazard. Removing power is the only safe action until repaired.
-
2
Do not attempt to reset
Unlike other errors, resetting will not fix a physically welded relay. Leave power off.
The relay is a mechanical component that must be physically replaced.
When to Call a Professional
Contact a qualified technician if:
- Relay shows continuity when it should be open
- Oven element glows with controls set to off
- Control board relay area shows discoloration
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Range Repair Service Schedule Appointment