Jenn-Air Range F8-E0 Error: Analog/Digital Board Error
What Does Jenn-Air Range Error Code F8-E0 Mean? The F8-E0 error code on Jenn-Air ranges indicates a communication failure between the analog and digital circuits on the control board. The board cannot properly convert sensor signals to digital data for temperature regulation. Common Causes Failed control board: The analog-to-digital converter circuit on the main control […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
No. Without proper analog-to-digital conversion, the oven cannot regulate temperature safely. Do not use the oven.
Can I reset the code?
No. This is a hardware failure on the control board — power cycling rarely resolves it permanently.
When to stop immediately?
Stop if you notice: Error returns after every power cycle, Temperature display is erratic.
Symptoms You May Notice
Oven will not heat at all
The oven accepts temperature input but the heating elements never energize.
Display shows random or incorrect temperatures
The temperature readout fluctuates wildly or shows impossible values.
Possible Causes
Failed control board
The analog-to-digital converter circuit on the main control board has failed. This is almost always a board-level issue.
Requires ProfessionalPower surge damage
A voltage spike damaged the sensitive analog circuitry on the control board.
Requires ProfessionalSafe Checks You Can Do
-
1
Power cycle the range
Turn off the circuit breaker for 5 minutes. Restore power and attempt to set the oven to 350°F.
If the error returns immediately, the control board has a permanent hardware failure.
-
2
Note whether stovetop works
Test the stovetop burners separately to determine if only the oven circuit is affected.
Stovetop and oven may use different control paths — one can fail while the other works.
When to Call a Professional
Contact a qualified technician if:
- Board-level diagnostic shows A/D converter failure
- Sensor readings are normal but board cannot process them
- Visible component damage on the main board
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Range Repair Service Schedule Appointment