Dishwasher Medium Severity
F6-E4 Appliance Error Code

Jenn-Air Dishwasher F6-E4 Error: Flow Meter Error

What Does Jenn-Air Dishwasher Error Code F6-E4 Mean? Error code F6-E4 on a Jenn-Air dishwasher means the water flow meter is giving abnormal readings. The flow meter measures exactly how much water enters the tub during the fill phase of each cycle. Common Causes The flow meter contains a small turbine that spins as water […]

Quick Assessment

Answer to continue safely

Is it safe to keep using?

No. A faulty flow meter can cause overfilling, which may leak and damage flooring. Do not use until repaired.

Can I reset the code?

Yes. A reset may work once, but if the meter is faulty, the error will return.

When to stop immediately?

Stop if you notice: Water overflows from the tub, Water leaks from door seal.

Symptoms You May Notice

Dishwasher overfills or underfills

The water level in the tub is either too high or too low because the meter is misreading flow.

Cycle stops during fill phase

The dishwasher halts shortly after starting because it cannot verify proper water fill.

Water leaks from the door during wash

An overfill condition causes water level to exceed the door seal capacity.

Possible Causes

1

Failed flow meter sensor

The turbine flow sensor has failed or its wiring has come loose.

Requires Professional
2

Debris in flow meter

Sediment from the water supply has jammed the flow meter turbine.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Power cycle the dishwasher

    Turn off the breaker for 5 minutes and try a new cycle.

    A temporary flow meter glitch may clear with a reset.

  2. 2

    Check for standing water

    Open the door and look for excessive water in the tub. If overfilled, cancel and drain before running a new cycle.

    Use the cancel/drain function if available, or bail water manually.

When to Call a Professional

Contact a qualified technician if:

  • Flow meter turbine does not spin
  • Sensor output is absent or erratic
  • Sediment found inside meter body

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Dishwasher Repair Service Schedule Appointment