Freezer Medium Severity
FN Appliance Error Code

Jenn-Air Freezer FN Error: Fan Motor Failure

What Does Jenn-Air Freezer Error Code FN Mean? Error code FN on a Jenn-Air freezer means the internal circulation fan has stopped working. This fan distributes cold air from the evaporator coils throughout the freezer compartment, ensuring even temperatures. Common Causes Two things stop this fan: a dead motor or ice blocking the blade. The […]

By Michael Turner Lead Appliance Repair Specialist & Technical Writer

Quick Assessment

Answer to continue safely

Is it safe to keep using?

Maybe. The freezer still produces cold but distribution is poor. Items near the evaporator may be fine while items far away may not stay frozen.

Can I reset the code?

Yes. If ice was blocking the fan, manual defrost followed by a reset will restore airflow. A dead motor will not restart after a reset.

When to stop immediately?

Stop if you notice: Freezer cannot keep items frozen, Fan motor makes grinding noise.

Symptoms You May Notice

Uneven freezing with warm spots

Some areas of the freezer are colder than others, with items near the top warming.

No air movement inside the freezer

Opening the door reveals no air circulation — normally a gentle flow of cold air is noticeable.

Frost concentrated in one area

Ice builds up heavily near the evaporator coils but other areas have no frost at all.

Possible Causes

1

Failed fan motor

The electric motor driving the circulation fan has burned out or has seized bearings.

Requires Professional
2

Ice blocking the fan blade

Frost has accumulated around the fan assembly, physically preventing the blade from spinning.

DIY Possible

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Listen for the fan

    Open and close the freezer door, listening for fan motor sounds. On most models, the fan stops when the door opens.

    Press the door switch to simulate a closed door and listen for the fan.

  2. 2

    Check for ice around fan

    Remove the rear panel inside the freezer to inspect the fan. If encased in ice, defrost manually.

    If ice is the cause, a defrost system issue is the root problem.

    Tools required

When to Call a Professional

Contact a qualified technician if:

  • Fan motor has no continuity
  • Motor shaft does not spin freely
  • Wiring to motor shows damage

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Freezer Repair Service Schedule Appointment

More Freezer Error Codes

View all codes →
CF SC PO HT PF DH CO EV TS