Jenn-Air Oven
Error Codes

F1-E0 Control Board EEPROM High The control panel lights up but pressing buttons has no effect on oven operation. View -> F2-E0 Keypad Short Circuit Medium Temperature adjusts or cooking modes change with no one touching the controls. View -> F2-E1 Upper Oven Overtemp High Food burns quickly and the oven exterior radiates much more heat than usual. View -> F3-E0 Upper Sensor Open Medium The upper oven cavity does not produce heat when a bake or broil cycle is selected. View -> F3-E1 Lower Sensor Short Medium The lower oven fails to reach the set temperature or heats inconsistently. View -> F3-E2 Oven Over-Temperature High Dishes overcook or burn well before the expected cooking time at the set temperature. View -> F3-E3 Upper Sensor Short Medium The oven does not reach the set temperature because the control thinks it is already hotter than it is. View -> F4-E0 Sensor Short Circuit Medium The control board refuses to energize heating elements because it cannot trust the temperature reading. View -> F5-E0 Watchdog Circuit Fault High The oven abruptly stops heating and the display shows F5-E0 — all functions are locked out. View -> F5-E1 Door Lock Failure Low Pressing the self-clean button displays the error instead of beginning the cycle. View -> F5-E2 Door Lock Stuck Medium The door remains physically locked shut even though no self-clean cycle is running. View -> F6-E0 Return Line Not Connected Medium Pressing any button on the control panel has no effect — the display may be on but inputs are ignored. View -> F8-E0 Board Communication High Pressing buttons on the control panel produces no response from the oven. View -> F9-E0 Door Lock Motor Fault Low Starting self-clean produces no whirring or mechanical sounds from the lock area. View ->