Jenn-Air Oven F1-E0 Error: Control Board EEPROM
What Does Jenn-Air Oven Error Code F1-E0 Mean? Error code F1-E0 on a Jenn-Air wall oven indicates the electronic oven control (EOC) board has lost communication with its internal EEPROM memory chip. This chip stores essential calibration data, temperature offsets, and operating parameters. Common Causes EEPROM failures are typically caused by electrical events — power […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
No. A control board that cannot access its memory may operate unpredictably. Do not use the oven until the board is replaced.
Can I reset the code?
Yes. A power cycle may temporarily clear the error, but a damaged EEPROM will cause it to return.
When to stop immediately?
Stop if you notice: Multiple error codes appear at once, Oven does not respond to any controls after reset.
Symptoms You May Notice
Oven does not respond to any controls
The control panel lights up but pressing buttons has no effect on oven operation.
Clock and settings reset repeatedly
The time and all programmed settings clear themselves after every power cycle.
Random error codes appear
Multiple different error codes flash on the display in quick succession.
Possible Causes
Corrupted EEPROM chip
The memory chip on the control board has corrupted data or has failed electrically.
Requires ProfessionalPower surge damage
A voltage spike damaged the control board circuitry affecting the memory subsystem.
Requires ProfessionalSafe Checks You Can Do
-
1
Power cycle the oven
Turn off the circuit breaker for 5 minutes, then restore power.
If the error was caused by a momentary power glitch, this may resolve it.
-
2
Note all displayed error codes
Write down every error code shown before and after the reset to help your technician diagnose.
Multiple simultaneous codes point strongly to a control board failure.
When to Call a Professional
Contact a qualified technician if:
- Error returns after every power cycle
- Board shows signs of electrical damage
- Multiple fault codes stored in diagnostics
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Oven Repair Service Schedule Appointment