Refrigerator Low Severity
WF Appliance Error Code

Jenn-Air Refrigerator WF Error: Water Filter Alert

What Does Jenn-Air Refrigerator Error Code WF Mean? The WF code on a Jenn-Air refrigerator is a maintenance reminder indicating the water filter needs replacement. Jenn-Air refrigerators track filter usage and alert you when the filter has reached its limit — typically after six months or about 200 gallons of water. How to Replace the […]

By Michael Turner Lead Appliance Repair Specialist & Technical Writer

Quick Assessment

Answer to continue safely

Is it safe to keep using?

Yes. The refrigerator functions normally. Water and ice are safe but may have reduced filtration quality until the filter is replaced.

Can I reset the code?

Yes. The filter indicator resets when you press and hold the reset button after installing a new filter.

When to stop immediately?

Stop if you notice: Water has visible discoloration, Strong chlorine or chemical taste in water.

Symptoms You May Notice

Water dispenser flow is reduced

Water from the door dispenser flows slower than normal due to a clogged filter.

Ice has off taste or odor

Ice cubes have an unusual taste or smell because the filter is no longer effective.

Filter status light is red or flashing

The filter indicator on the display shows that the filter has expired.

Possible Causes

1

Filter has reached usage limit

The carbon filter has processed its maximum water volume (typically 200 gallons) and is no longer effective.

DIY Possible
2

Six-month timer expired

The refrigerator tracks filter age and alerts after approximately six months regardless of usage.

DIY Possible

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Replace the water filter

    Locate the filter (usually inside the refrigerator compartment or in the base grille). Turn it counterclockwise to remove and install the new filter.

    Use a Jenn-Air or EveryDrop compatible filter for your model. Run 3 gallons through the new filter before using.

  2. 2

    Reset the filter indicator

    After replacing the filter, press and hold the filter reset button for 3 seconds until the light changes to green.

    The location of the reset button varies by model — check your owner manual.

When to Call a Professional

Contact a qualified technician if:

  • Filter housing is cracked or leaking
  • Water flow does not improve with new filter
  • Filter head connector is damaged

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Refrigerator Repair Service Schedule Appointment

More Refrigerator Error Codes

View all codes →
HS RS DE FF PF DI SY-CE PO IC PC DF EF