Dishwasher High Severity
F1-E1 Appliance Error Code

Jenn-Air Dishwasher F1-E1 Error: Control Board Error

What Does Jenn-Air Dishwasher Error Code F1-E1 Mean? Error code F1-E1 on a Jenn-Air dishwasher indicates the main control board has an internal failure. This board is the brain of the dishwasher — it controls water fill, wash motor operation, drain pump, heating, and cycle timing. Common Causes Main control boards typically fail from power […]

Quick Assessment

Answer to continue safely

Is it safe to keep using?

No. A faulty control board cannot reliably manage wash cycles. Do not use until repaired.

Can I reset the code?

Yes. A power cycle may temporarily clear the error, but hardware board failures typically return.

When to stop immediately?

Stop if you notice: Error returns after every power cycle, Control panel is completely unresponsive.

Symptoms You May Notice

Dishwasher will not start any cycle

Pressing start has no effect — the dishwasher does not fill, wash, or drain.

Control panel lights flash erratically

Multiple indicator lights blink in an unusual pattern not matching any normal cycle.

Cycle stops mid-wash with no warning

The dishwasher halts during operation and displays the error code.

Possible Causes

1

Failed main control board

A component on the main board has failed, preventing proper operation.

Requires Professional
2

Power surge damage

A voltage spike has damaged the control board electronics.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Power cycle the dishwasher

    Turn off the circuit breaker for 5 minutes, then restore power.

    A temporary board glitch can sometimes clear with a full power cycle.

  2. 2

    Check for recent power surges

    If there was a recent storm or known power fluctuation, the surge may have damaged the board.

    Consider a surge protector for the dishwasher circuit going forward.

When to Call a Professional

Contact a qualified technician if:

  • Board shows burned or swollen components
  • No output voltage from board to motor
  • Diagnostic mode cannot be entered

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Dishwasher Repair Service Schedule Appointment