Jenn-Air Dishwasher F5-E1 Error: Door Switch Failure
What Does Jenn-Air Dishwasher Error Code F5-E1 Mean? Error code F5-E1 on a Jenn-Air dishwasher means the door switch does not detect the door as latched. This is a safety interlock — the dishwasher will not fill or operate with water unless the door is confirmed closed. Common Causes On Jenn-Air panel-ready dishwashers, the custom […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. If the door latches with firm closure, the dishwasher is safe. The door switch is a safety feature — it prevents operation with an open door.
Can I reset the code?
Yes. Closing the door properly clears the error. No power cycle needed.
When to stop immediately?
Stop if you notice: Door will not stay closed at all, Water leaks from the door during operation.
Symptoms You May Notice
Dishwasher will not start despite door closed
The door is firmly shut but the dishwasher acts as if it is open and refuses to start.
Cycle interrupts when door is bumped
Even slight vibration near the door causes the cycle to pause or stop.
Latch clicks but does not hold
The door latch engages momentarily then releases, not maintaining a firm closed state.
Possible Causes
Misaligned door latch
The latch and strike plate are not aligned, preventing a solid connection.
DIY PossibleFailed door switch
The electrical switch that confirms the door is latched has failed electrically.
Requires ProfessionalWorn latch mechanism
The latch has worn to the point where it cannot engage fully with the strike plate.
Requires ProfessionalSafe Checks You Can Do
-
1
Inspect the door latch
Open the door and check the latch hook at the top of the door for damage. Look at the strike plate on the frame for alignment.
On panel-ready Jenn-Air models, the custom panel weight can shift the door alignment over time.
-
2
Test with firm closure
Push the door firmly closed and press start. If the dishwasher starts, the latch alignment may just need adjustment.
If extra force is needed every time, the latch or hinges need professional adjustment.
When to Call a Professional
Contact a qualified technician if:
- Door switch has no continuity when pressed
- Latch hook is bent or broken
- Hinges are loose or worn
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Dishwasher Repair Service Schedule Appointment