Dishwasher Medium Severity
F5-E2 Appliance Error Code

Jenn-Air Dishwasher F5-E2 Error: Door Not Closing

What Does Jenn-Air Dishwasher Error Code F5-E2 Mean? Error code F5-E2 on a Jenn-Air dishwasher means the door cannot close properly. This can be a simple obstruction or a mechanical issue with the door hinges or latch assembly. Common Causes Most often, a tall item on the upper rack extends past the tub opening and […]

Quick Assessment

Answer to continue safely

Is it safe to keep using?

No. An improperly sealed door will leak water during cycles, potentially damaging flooring and cabinetry.

Can I reset the code?

Yes. Removing the obstruction and closing the door properly clears the error.

When to stop immediately?

Stop if you notice: Water leaks from the door during operation, Door hinge is visibly broken.

Symptoms You May Notice

Door bounces back when closing

The door does not stay shut and springs back open after attempting to close.

Gap visible between door and frame

A visible gap exists when the door should be fully closed.

Dishwasher runs but leaks water

The cycle starts but water seeps from the door seal due to an incomplete closure.

Possible Causes

1

Dish rack preventing closure

A dish, pot handle, or rack is extending past the tub opening and blocking the door.

DIY Possible
2

Broken door hinge spring

A hinge spring or cable has broken, preventing the door from closing with proper tension.

Requires Professional
3

Warped door liner

Repeated exposure to hot water and steam has warped the inner door liner, preventing a flush closure.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Check for obstructions

    Open the door and look for anything extending above the tub rim — tall glasses, pot handles, utensils in the upper rack.

    Reposition any items that extend past the rim of the tub.

  2. 2

    Test door closure manually

    With racks pushed fully in, close the door slowly and check for any point where it catches or resists.

    If the door hinge feels loose or floppy, a spring or cable may have broken.

When to Call a Professional

Contact a qualified technician if:

  • Hinge springs are broken or stretched
  • Door liner is warped
  • Latch assembly is damaged

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Dishwasher Repair Service Schedule Appointment