Jenn-Air Dishwasher F7-E1 Error: Heating Element Fail
What Does Jenn-Air Dishwasher Error Code F7-E1 Mean? Error code F7-E1 on a Jenn-Air dishwasher means the heating element has failed. This circular element at the bottom of the tub serves two purposes: it heats wash water during the cycle and provides heat for drying dishes. Common Causes Heating elements fail from thermal cycling stress […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. The dishwasher can still wash dishes with hot water from the supply. Cleaning may be reduced and dishes will not dry as well.
Can I reset the code?
Yes. A reset clears the error code, but the element will not work until replaced.
When to stop immediately?
Stop if you notice: Water never gets warm during any cycle, Element shows visible damage or burning.
Symptoms You May Notice
Dishes wet and not dry after cycle
The drying phase does not generate heat, leaving all dishes wet at the end of the cycle.
Water temperature stays low during wash
The wash water feels cool when opening the door mid-cycle, indicating no heating.
Sanitize light does not illuminate
The sanitize indicator does not turn on because the required temperature was never reached.
Possible Causes
Burned-out heating element
The resistive element at the bottom of the tub has failed, creating an open circuit.
Requires ProfessionalFailed heating relay on board
The relay on the control board that powers the element has failed.
Requires ProfessionalSafe Checks You Can Do
-
1
Inspect the heating element
Remove the lower rack and look at the circular element at the bottom of the tub. Check for visible breaks or blistering.
A visibly damaged element confirms the issue without any testing needed.
-
2
Check for hot water supply
Run hot water at the kitchen sink before starting the dishwasher.
Pre-heated water partially compensates for a failed element, improving wash results temporarily.
When to Call a Professional
Contact a qualified technician if:
- Element has no continuity
- Element shows visible breaks or blistering
- Board relay does not close when tested
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Dishwasher Repair Service Schedule Appointment